Recently updated on December 16th, 2024
Summary
In any event, trade show or storefront, the versatility of adjustable banner stands helps maximize your impact and leave a lasting impression on your audience. These easy-to-follow instructions ensure you adjust and set your banner up for optimal presentation.
Step-by-Step Instructions
Step 1: Gather and Identify Components
- Open the carrying case and lay out all the components of the adjustable banner stand.
- You should have two feet, four thumb screws, two Allen wrenches, two vertical poles with threaded bolts, and two horizontal poles with screw ends.
Step 2: Assemble the Vertical Poles
- Attach the feet to the vertical poles using the thumb screws. Ensure the holes drilled into the sides of the poles are perpendicular to the feet.
- Use the Allen wrench to secure the thumb screws, ensuring a snug fit but not overtightening.
Step 3: Prepare the Banner
- Lay out your banner and identify the top and bottom ends. Ensure the banner has pull pockets at least at the top for attachment.
- Thread one of the vertical poles through the top pull pocket of the banner.
Step 4: Adjust the Vertical Poles
- Loosen the caps on the vertical poles by turning them counterclockwise.
- Telescopically adjust the length of both vertical poles to fit the banner. Try to keep them balanced for stability.
Step 5: Attach the Banner to the Frame
- Position the legs of the banner stand at the desired distance apart.
- With the help of another person, align the holes on the top horizontal pole with the vertical poles and insert the thumb screws.
- Repeat the process for the bottom horizontal pole, adjusting the length of the vertical poles if necessary.
Step 6: Secure the Banner
- Slide the bottom of the banner onto the bottom horizontal pole.
- Tighten the thumb screws on both horizontal poles to secure the banner in place.
- Adjust the tension of the banner by loosening or tightening the rings on top of the vertical poles.
Step 7: Final Adjustments
- Lift the banner stand upright and adjust the banner for proper tension and alignment.
- Tighten the rings on top of the vertical poles to secure the height and tension of the banner.
Step 8: Taking Down the Banner
- To disassemble the banner stand, reverse the assembly process in the same order.
- Loosen the rings on top of the vertical poles and remove the banner.
- Carefully disassemble the frame and store all components back in the carrying case.
