Recently updated on December 16th, 2024
How to set up your Custom Printed Lightbox
Summary
Well-assembled lightboxes can change the look and feel of any event space. Whether you’ll use it for personal or professional use, setting up this display requires extra attention to detail. The following step-by-step guide provides clear and detailed instructions to ensure optimal results.
Step-by-Step Instructions
Step 1: Foundation Assembly
- Identify and gather parts labeled HEB part number one and part number two.
- Ensure all engravings are facing the same direction.
- Connect part number one and part number two, making sure the male and female sides align.
- Tighten the connection securely.
Step 2: Power Bank Installation
- Locate part number three and part number eight.
- Connect part number eight to part number one.
- Securely attach part number three to part number two.
Step 3: Selecting Center Sections
- Determine the appropriate center section based on the dimensions of the fabric (e.g., 10 by 10 or 10 by 8).
- Use the designated center section for your chosen fabric size.
- Connect the center section to the base with electrical connections.
Step 4: Assembling the Top Section
- Combine parts HE1000T, six, and five to form the top portion.
- Connect the assembled top portion to the frame.
Step 5: Adding Side Sections
- Ensure all engravings on part seven are facing the correct side.
- With assistance, connect part seven to the frame, aligning male and female sides.
Step 6: Installing Support Bars
- Attach support bars S1 and S2 to the frame, ensuring proper alignment and connection.
- Use notches to secure the support bars in place.
Step 7: Finalizing Frame Setup
- Install center support bars (S2, S4, HS1000) with red notches on the top and bottom.
- Verify that all engravings are facing forward for proper assembly.
Step 8: Fabric Installation
- Connect the fabric with silicone-edged strips to the frame, starting from corner to corner.
- Insert the silicone strip into the frame by running your finger down the edges.
Step 9: Connecting Power Cord
- Feed the power cord through the opening at the bottom of the frame.
- Ensure a secure connection by listening for a click.
Step 10: Testing and Final Touches
- Test the lights to ensure they are functioning correctly.
- Add secondary fabric to the back of the frame for a finished look.
